X5600 Offline X-ray Inspection Machine - Ảnh 2

X5600 Offline X-ray Inspection Machine - Ảnh 3

X5600 Offline X-ray Inspection Machine

Thông tin sản phẩm

Mô tả
Đánh giá (0)

Automatic Void Ratio Calculation

Enhanced BGA inspection function
X5600 industrial X-ray inspection machine can quickly select and mark a single solder ball, or select the solder balls to be inspected by matrix box; it can manually or automatically identify BGA solder balls and complete the inspection. Follow the system guidelines to easily complete the inspection process and ensure accurate and reliable inspection results.
02

Size Measurement

Measuring tools Distance, distance ratio, lines distance, angle, arrow mark, circle radius, point distance, circle centres distance, circumference, hand-drawn polygon, hand-drawn freeform, etc. can add a text description.
03
Defect Inspection
- Automatically detect defects
X5600 can automatically detect the size, area, broken wire, bridging, etc.
- Customizable image algorithm
Customerized software algorithms based on product features and request to achieve fully automatic defect inspection algorithms, including Y/N, crack, broken wire, offset size, and quantity, etc.
04
CNC Inspection
- CNC automatic operation inspection
X5600 supports CNC multi-point automatic inspection mode, based on product feature set multi-point coordinates for automatic inspection.
- The automatic CNC operation detection
Automatically save images, generate reports, also support batch inspection.
05
Tilt/Rotate Function
- Tilt angle inspection function
The X5600 detector produced by Zhuomao supports a tilt angle of ±30°. For cases where the photo taken on the front of a special device cannot identify the defect feature, the tilt function can be used to observe the device features at multiple angles, making it easier to analyze and identify the defect.
- 360° Rotating photo inspection function
Equipped with a rotating manipulator that can rotate 360 degrees to take images, no dead angle for defects observation.

Advantages of Seamark X5600 Offline X-ray Inspection Machine

Miniaturized equipment, easy to install and operate.
Applicable to Chip, LED, BGA/CSP, Wafer, SOP/QFN, SMT and PTU packaging, Sensors, Connectors, and Precision Castings inspection.
High resolution design to get the best image in a very short time.
Infrared automatic navigation and positioning function can select the shooting location quickly.
CNC inspection mode which can quickly and automatically inspect multi-point array.
Inclined multi-angle inspection makes it easier to inspect sample defects.
Simple softwareoperation, low operating costs.
Long lifespan.

Drawing of Seamark X5600 Offline X-ray Inspection Machine

Drawing of X5600 Offline X-ray Inspection Machine

Specification of Seamark X5600 Offline X-ray Inspection Machine

X-Ray Tube Source Specification
Type	Sealed Micro-Focus X-Ray Tube
voltage Range	40-90KV
current Range	10-200 μA
Max Output Power	8 W
Micro Focus Spot Size	15μm

Flat Panel Detector Specification
Type	TFT Industrial Dynamic FPD
Pixel Matrix	768×768
Field of View	65mm×65mm
Resolution	5.8Lp/mm
Frame（1×1)	40fps
A/D Conversion Bit	16bits

Dimensions	L850mm×W1000mm×H1700mm
Input Power	220V 10A/110V 15A 50-60HZ
Max Sample Size	280mm×320mm
Control System	Industrial PC WIN7/ WIN10 64bits
Net Weight	About 750KG

Safety Considerations of X5600 Offline X-ray Inspection Machine

Obtained an exemption record from the Ministry of Ecology and Environment of the People’s Republic of ChinaThe X5600 obtained the certification document (sixth batch) for the exemption record of radioisotope and ray device of the Ministry of Ecology and Environment, with the record number [Yuehuan [2018] No. 1688]. The radiation device using this product model of our company can be exempted from the radiation safety license.

Safety Protection DesignAccording to the “Ionizing Radiation Protection and Radiation Source Safety Basic Standards” (GB18871-2002), the radiation protection exemption standard is ≤1uSv/h, the design standard of this product is ≤0.5uSv/h, it is equivalent to 1/10 of the amount of radiation in the natural environment.
Components Multiple Safety ProtectionEquipped with OMRON’s safety control element, triple safety protection sensor, and direct connection control method with ray source, it fully complies with CE specifications and SEMI S2/S8 specifications of the semiconductor industry.