Tiếng Việt
Temperature Humidity Vibration Test Chamber
Electronic instruments, materials, electrical, electronic products, and various electronic components under the comprehensive environmental conditions of temperature and humidity, Reliability Qualification Test (RQC), Product Reliability Acceptance (PRAT), Routine Test, Stress Screening Test (ESS), etc.
It is suitable for high temperature, low temperature, high and low temperature cycle tests, as well as constant damp heat and alternating damp heat tests on new energy auto parts products, and can realize comprehensive tests of temperature-humidity factors.
Product Information
|
Item |
Specification |
| Internal chamber dimension (W*D*H) | 1000*1000*1000mm |
| External chamber dimension(W*D*H) | 1200*3000*3800mm approx. |
| Temperature range | -40 ℃~ 150℃ |
| Temperature fluctuation | ±0.5℃ |
| Temperature uniformity | 2℃ |
| Cooling speed(temp. Range: 85C~-40C) | 5℃/min in average; without loading |
| Heating speed(temp. Range: -40C~85C) | 5℃/min in average; without loading |
| Humidity range | 10~98%RH (please refer to the below humidity curve) |
| Humidity fluctuation | ±3%RH |
| Internal chamber material | SUS#304 stainless steel, mirror finished |
| External chamber material | Stainless steel with paint spray |
| Cooling method | Water-cooled |
| Controller | Programmable control temperature and humidity Can set different parameter for cyclic test |
| Insulation material | 50mm high density rigid Polyurethane foam |
| Heater | Explosion-proof type SUS#304 stainless steel fins radiator pipe heater |
| Compressor | German Bock compressor |
| Refrigerant | Environmental friendly refrigerant R449A/R23 |
| Temperature sensor | PT-100 dry and wet bulb sensor |
| Observation window | Tempered glass |
| Testing hole | 2 units with diameter 100mm, for cable routing |
| Sample tray | SUS#304 stainless steel, 2pcs |
| Safety protection device | Protection for leakage Over-temperature Compressor over-voltage and overload Heater short circuit |
|
Vibration Shaker |
|
| Max. Sine Force | 3200Kg.f peak |
| Max. Random Force | 3200Kg.f r.ms |
| Max. Shock Force | 6400Kg.f peak |
| Frequency Range | 2~3000Hz |
| Displacement (p-p) | 51 mm |
| Max. Velocity | 2m/s |
| Max. Table Acceleration | 100g (without loading) |
| Armature Diameter | 335mm |
| Effective Armature Mass | 30kg |
| HE/ST screw dimension | 17×M10 |
| Max. Load Capacity | 300kg |
| Magnetic Leakage | ＜10gauss |
| Axial Vibration Isolation Frequency | <2.5Hz |
| Power | Three-phase, 380V, 50Hz |
| Machine dimension | 845mm*790mm*840mm; without expander table |
| Vibration controller system | |
| Controller Hardware | No of input channels: 02 analogue channels ADC: 24-bit Resolution No of output channels: 01 DAC: 24-bit Resolution USB 2.0 communication port |
| Controller Software Modules | Random Vibration (1-5000Hz), Sweep Sine Vibration (1-5000Hz), Classical Shock, Resonance Search, Track and Dwell and Self Calibration |
| Other accessory | Test Computer: LENOVO M4500 Printer: HP 1020plus |
| Customer Responsibilities | Installing all utilities where required, including connecting utilities to the equipment Installation/rigging of equipment Completing any necessary building alterations including roof penetrations Customers responsible for any permits required by – local/state government |
Be the first to review “Temperature Humidity Vibration Test Chamber”
Related products
ENVIRONMENT CHAMBER
ENVIRONMENT CHAMBER
ENVIRONMENT CHAMBER
ENVIRONMENT CHAMBER
ENVIRONMENT CHAMBER
Reviews
There are no reviews yet.