Maxlab Delivers Seamark R720A BGA Rework System to Hanoi Mobility (Bac Ninh)

Maxlab Bàn Giao Hệ Thống BGA Rework Seamark R720A Cho Hanoi Mobility (Bắc Ninh)
BGA Rework Seamark R720A is the breakthrough technological solution recently delivered by Maxlab Company to our partner, Hanoi Mobility, in Bac Ninh. Implementing this genuine Seamark BGA Rework system not only optimizes the repair process for micro-electronic components but also reaffirms a commitment to absolute precision and quality in modern industrial manufacturing.
Maxlab Delivers Seamark R720A BGA Rework System to Hanoi Mobility (Bac Ninh)

1. The Vital Role of BGA Rework Technology in Bac Ninh’s Electronic Hub

Bac Ninh stands as Vietnam’s largest electronics manufacturing center, hosting global supply chains. Hanoi Mobility, a leading high-tech service provider, constantly faces the challenge of processing Printed Circuit Boards (PCBs) with high component density.
Components such as BGA, CSP, and Micro SMD chips require extremely low mounting tolerances. Manual methods often result in high PCB failure rates. Therefore, equipping a specialized BGA Rework machine like the Seamark R720A is a strategic move to:
  • Eliminate the risk of thermal damage to surrounding components.
  • Ensure 100% perfect contact for solder balls.
  • Accelerate the recovery and reuse of expensive components, reducing waste.

Maxlab Delivers Seamark R720A BGA Rework System to Hanoi Mobility (Bac Ninh)

2. Outstanding Advantages of Seamark R720A Provided by Maxlab

After surveying the practical needs at the Hanoi Mobility factory, Maxlab’s technical team recommended the Seamark R720A—the most advanced model in the micro-chip repair segment.

HD Optical Alignment System

Unlike conventional machines, the R720A features a high-resolution camera system that allows for sharp digital overlays of the chip pins and the PCB position. This enables technicians to adjust the chip position with micrometer precision before proceeding with the thermal soldering process.

3-Zone Independent Heating Technology

The machine is designed with three independent heaters (Top, Bottom, and IR Preheater). This combination creates a perfect “thermal profile,” allowing heat to distribute evenly without deforming the board. Notably, the top hot air nozzle can rotate 360 degrees, fitting any BGA chip angle.

High Level of Automation

Every process—from chip suction and alignment to re-soldering—is pre-programmed on a 7-inch touch screen. Technicians simply select the appropriate thermal profile, and the machine automatically executes the remaining steps, minimizing human error.
Maxlab Delivers Seamark R720A BGA Rework System to Hanoi Mobility (Bac Ninh)

3. Comparison Table: Seamark R720A vs. Traditional BGA Rework Systems

To understand why Hanoi Mobility chose to invest in this model, let’s look at the comparison below:
FeatureTraditional BGA ReworkSeamark R720A (Provided by Maxlab)
Alignment SystemManual (By eye)HD Optical (Digital Overlay)
Accuracy± 0.1 mm± 0.01 mm
Heating ZonesUsually 1-2 zones3 Independent Zones (Top/Bottom/IR)
Micro Component HandlingDifficult, high failure rateSpecialized for Micro BGA (0.6mm)
AutomationFully manualAuto desoldering, soldering & cooling
Thermal Profile StorageLimited (or none)Unlimited storage on PLC

4. Technical Specifications of the R720A Model

SpecificationValue
ManufacturerSeamark ZM
ModelR720A
Total Power5800W
Max PCB Size412 x 370 mm
Min Chip Size0.6 x 0.6 mm
Cooling SystemHigh-flow cross-flow fan
Control Interface7-inch Touch Screen

5. Delivery Process and Technical Support from Maxlab

For the project at Hanoi Mobility (Bac Ninh), Maxlab acted not just as an equipment vendor but as a comprehensive technical solution partner:
  1. Shipping & Installation: The equipment was packed to international standards and safely transported to the Bac Ninh factory.
  2. Setup & Calibration: Maxlab engineers performed real-time temperature measurements at the nozzle to synchronize with the control software, ensuring the machine operates according to manufacturer specifications.
  3. In-depth Training: We directly instructed Hanoi Mobility’s technicians on how to create thermal profiles for specific chips (iPhone, Samsung, Industrial Boards, etc.).
  4. Warranty & Maintenance: Maxlab commits to long-term genuine warranty and incident response within 24 hours.

Maxlab Delivers Seamark R720A BGA Rework System to Hanoi Mobility (Bac Ninh)

6. Economic Benefits for Hanoi Mobility

Deploying the BGA Rework Seamark R720A has helped Hanoi Mobility achieve impressive results:
  • Increased Productivity: Processing time for a single BGA chip was reduced by 40%.
  • Cost Savings: Minimized the disposal of expensive PCBs due to thermal soldering errors.
  • Enhanced Reputation: Owning modern machinery helps Hanoi Mobility easily pass audits from demanding customers in the electronics supply chain.

7. Maxlab – The Leading Trusted Supplier of BGA Rework Equipment in Vietnam

With the motto “Leading Technology – Dedicated Service,” Maxlab Company is the top choice for both FDI and local enterprises in the electronic repair sector. We take pride in delivering the highest quality BGA Rework products from Seamark to our customers.
If your business in Bac Ninh, Hanoi, or any region nationwide needs an equipment upgrade, contact us today.
Thông tin liên hệ:
  • CÔNG TY CỔ PHẦN THIẾT BỊ MAXLAB
  • Địa chỉ: Hà Đông, Hà Nội
  • Hotline: 0986.666.914
  • Email: marketing@maxlab-jsc.com
  • Website: maxlab-jsc.com
Conclusion: The delivery of the BGA Rework Seamark R720A to Hanoi Mobility is a clear testament to the effective cooperation between a reputable equipment supplier and a dynamic manufacturer. Maxlab is committed to continuing to provide the most optimal technological solutions for Vietnam’s electronics industry.

Leave a Reply

Your email address will not be published. Required fields are marked *